HWg-WLD Relay detects a water leak anywhere along the length of the connected sensing cable (2+2m – 6.5+6.5ft). Water leak or cable disconnection is indicated by activating a relay (NO/NC). The sensor can be connected to a Poseidon unit over the 1-Wire UNI bus (RJ11).
HWg-Juno is an I/O device for IP CCTV integration. You can simply connect digital inputs & relay outputs to your current central IP video management system. HWg-Juno support protocols for seamless integration with most IP Video software packages.
The RS-232 is a popular communications protocol for connecting computers to modems and varied peripherals. Here is a complex of useful information, instructions, tips & tricks, datasheets and etc. You can find pinout of the standard connectors, what is HANDSHAKING, wiring with IC's from MAXIM - MAX232.
The RS-232 is a popular communications protocol for connecting computers to modems and varied peripherals. Here is a complex of useful information, instructions, tips & tricks, datasheets and etc. You can find pinout of the standard connectors, what is HANDSHAKING, wiring with IC's from MAXIM - MAX232.
This document provides an introduction to intelligent modems, the AT command set and the concepts behind many of the commands. The AT commands are used to configure the modem to your preferred operating mode and to instruct the modem to do what you want it to do.
The LIN is a new bus technology which brings a more possibilities. The main field of usability is the vehicle industry. It should be considered as the low-cost alternative to a CAN (Controlled Area Network) bus. The both - CAN and LIN - are usable in several industries not only in the car industry. The low-cost and wide applicability has been the main reason for the LIN development. The LIN bus seems like a good solution and we can expect a big advancement of the technology.
Industrial plants comprise many devices interconnected in different ways: simple data collection units without any built-in intelligence, more intelligent devices such as sensors with built-in intelligence, single-loop controllers or programmable controllers and supervisory systems. Bluetooth wireless technology is potentially useful for all of these.
Realterm is a terminal program specially designed for capturing, controlling and debugging binary and other difficult data streams. It is far better for debugging comms than Hyperterminal. It has no support for dialing modems, BBS etc - that is what hyperterminal does.